News

PET hot stamping foil door film is a type of decorative film used for adding a metallic or holographic effect to the surface of doors or other objects. Here are the general steps to use it:

Clean the surface: Before applying the PET hot stamping foil door film, clean the surface of the door or object with a dry cloth to remove any dust, dirt, or debris. Make sure the surface is completely dry.

Cut the foil: Measure the size of the door or object and cut the foil to the desired size. You can use scissors or a paper cutter to cut the foil.

Apply the adhesive: Apply the adhesive to the surface of the door or object using a brush or roller. You can use a general-purpose adhesive or a specialized adhesive recommended by the foil manufacturer. Be sure to apply the adhesive evenly and avoid any bubbles or wrinkles.

Place the foil: Carefully place the foil on the adhesive, starting from one end and smoothing it out towards the other end. Make sure the foil is evenly aligned and there are no wrinkles or bubbles.

Heat the foil: Using a heat press or a hot stamping machine, apply heat and pressure to the foil for a few seconds until it adheres firmly to the surface. Follow the manufacturer's instructions for the appropriate temperature and pressure settings.

Remove the protective layer: After the foil has cooled down, gently remove the protective layer from the surface of the foil.

Finish the surface: After applying the PET hot stamping foil door film, you can add a clear coat or protective finish to protect the foil and enhance its appearance. Allow the surface to dry completely before handling or using the door or object.

It's important to follow the manufacturer's instructions for the specific type of PET hot stamping foil door film you are using, as different brands and products may have different application methods and requirements.